Technical parameters:Adopting BS architecture, it can be accessed anywhere with Ethernet port, and can accept access and control from servers and other IP network devices;Network fault self-diagnosis,
Technical parameters:
Adopting BS architecture, it can be accessed anywhere with Ethernet port, and can accept access and control from servers and other IP network devices;
Network fault self-diagnosis, network and service status display;
It can convert digital audio signals on the network into analog audio signals;
European terminal output;
When the fire signal is activated, the corresponding channel will automatically output passive contact signals to control other linkage devices
The local power amplifier has an MP3 player, supports MP3 and WMA dual decoding, USB interface, and super disk reading ability;
The local power amplifier has Bluetooth wireless audio function
The local power amplifier has FM radio function;
The local power amplifier has built-in reminder bell and alarm siren switch;
The local power amplifier has three line inputs (line input 1 is shared with the network decoding line), two microphone inputs, and one line output;
The local power amplifier microphone 1 has priority (automatic mute function);
Protection, signal, peak clipping indication;
Treble and bass balance control;
100V, 70V constant voltage output, 8 ohm constant resistance output;
Standby function, energy saving and environmental protection, and extended service life;
Technical parameters:
Model | IP-80AP BS | IP-120AP BS | IP-180AP BS | IP-240AP BS |
Network Interface | Standard RJ45, 10M/100M network port, network port with built-in upgrade function | |||
Support Agreement | TCP,UDP,IGMP,ICMP,ARP | |||
Audio Format | MP3、WMA、WAV、APE、FLAC、OGG | |||
Standby | Automatic standby after 2 minutes without network decoding signal | |||
Power outage and network disconnection restart recovery time | Less than 1 second | |||
Network delay | Broadcast buffer is customizable (30-500ms) | |||
Transfer rate | 10/100Mbps | |||
Audio Mode | Network packets | |||
Microphone Input | -60dB, 600Ω, unbalanced, 6.3mm straight plug | |||
AUX input | -20dB, 10kΩ, unbalanced, stereo RCA interface (AUX1 is shared with network decoding signal) | |||
Line Out | 0dB, 600Ω, unbalanced, stereo RCA jack | |||
Speaker output | High impedance: 100V, 70V; Low impedance: 8Ω; | |||
Protection Circuit | AC fuse, overheat, overvoltage, overcurrent, short circuit, DC and power-on delay protection. | |||
Effects | 5 kinds of balanced sound effects to choose from (for MP3 playback and FM radio) | |||
Total output balance control | Treble: ± 12dB at 10kHz; Bass: ± 12dB at 100Hz | |||
Frequency Response | 20~20kHz (±3dB) | |||
Signal-to-Noise Ratio | Microphone input>66dB; AUX auxiliary input>75dB | |||
Control output | Passive trigger output | |||
Amplifier power | 80W | 120W | 180W | 240W |
power supply | 220~240VAC, 50/60Hz | |||
Power consumption (at rated output) | 110W | 170W | 250W | 350W |
weight | 6kg | 7kg | 8kg | 10kg |
Operating temperature/humidity | -10°C ~ +40°C,<95% | |||
Dimension | 482(W) × 70(H) × 310(D) mm | |||
Gross Weight | 8kg | 9kg | 10kg | 12kg |
Packing dimension | 0.0299CBM, 58(W) x 43(H) x 12(D) cm | |||
