Functional Features：Using BS architecture, it can be accessed anywhere with an Ethernet port, and can accept access and control from servers and other IP network devices;Network fault self-diagnosis,
Functional Features：
Using BS architecture, it can be accessed anywhere with an Ethernet port, and can accept access and control from servers and other IP network devices;
Network fault self-diagnosis, network and service status display;
Digital audio signals on the network can be converted into analog audio signals;
Single-channel independent digital power amplifier; built-in limiter;
European-style wiring terminal input and output;
When a fire signal is activated, the corresponding channel will automatically output a passive contact signal to control other linkage devices
Unique power amplifier detection function, the network can monitor the power amplifier status in real time;
The digital power amplifier is suitable for two 70/100V line installations (selectable through the DIP switch)
Each channel has volume control and LED indicators (signal, clipping and protection)
Power output (70/100V): 300W/450W/600W;
Technical parameters:
model | IP-300AP BS | IP-450AP BS | IP-600AP BS |
Network Interface | Standard RJ45, 10M/100M network port, network port with built-in upgrade function | ||
Support Agreement | TCP,UDP,IGMP,ICMP,ARP | ||
Audio Format | MP3、WMA、WAV、APE、FLAC、OGG | ||
Standby | Automatic standby after 2 minutes without signal | ||
Power outage and network disconnection restart recovery time | Less than 1 second | ||
Network delay | Broadcast buffer is customizable (30-500ms) | ||
Transfer rate | 10/100Mbps | ||
Audio Mode | Network packets | ||
Amplifier frequency response | 100HZ~15KHZ | ||
Harmonic distortion | ≤0.3% | ||
Amplifier signal-to-noise ratio | >95db | ||
Local Line Input Sensitivity | 0.9-1.1V (0+/-1dBV) | ||
Local input impedance | 20k (balanced), 10k (unbalanced) | ||
Control output | Passive trigger output | ||
Operating temperature | -20℃～+60℃ | ||
Operating humidity | 10%～90% | ||
Amplifier power | 300W | 450W | 600W |
Power consumption | ≤20W (no load) | ||
Input Power | AC220V/50Hz AC110V/60Hz | ||
Dimension | 482(W) × 44(H) × 360(D)(mm) | ||
