The DCS-8001 is the setup and control software for the VX-8000 digital matrix voice grooming system. The principle of this software design is to make it easier and faster to establish the requirements of VX-8000 broadcast system and change the system settings.
The DCS-8001 control software version will be continuously updated to accommodate the new broadcast system requirements.
Among them, the VX-8000 system has an external upgrade software DSC-8300_update to upgrade the internal memory program of the system central controller DSC-8300. It can cooperate with DCS-8001 Windows software to improve system functions.
Program features and functions:
The VX-8000 system design is more used in the environment away from the computer, but through the setting of DCS-8001, you can quickly and simply establish your specific broadcasting needs. When you use the software to set up the functions you need, you can completely get away from the computer to use.
Software humanized design can make installation simple and easy, and the rich event and information printing features allow programmers to easily create installation and wiring documentation
Powerful timing and zone autoplay module makes timing playback easy and meets different priority levels...
VX-8000 The various function keys of the system are divided in o:
1.DSR: Normal broadcast distribution button on the speaker router (the corresponding audio source is Mic1~4 and Aux1~8 on the host, which can be one or more combinations Mix Bus1~4);
2.EM: emergency broadcast button on the speaker router (the corresponding audio source is the manual emergency broadcast microphone on the host);
3.DRM: broadcast button on the remote microphone workstation (the corresponding source is the gooseneck microphone of the current microphone workstation);
4.FIRE: Fire alarm triggers the automatic alarm linkage area button (the corresponding sound source is the first section of the host built-in recording memory);
The settings of these buttons determine the various functions of the system, and the DCS-8001 control software is designed to make these settings simple and fast. The system uses each port of the DSR as a minimum partition. One or more partitions can form a group area. The area corresponding to the DSR, EM, DRM, and FIRE buttons is the group area.
If you need to continue to keep the real-time control of the computer after setting up the system function, you can also perform the following functions through various parts of the software:
1.Connect the update program through the RS-232 port of the computer, the network card port or the LAN and the internet.
2.Switch the Mix bus 1 to 4 output of the host LCD panel, which is equivalent to the mixing of the groups 1 to 4 of Mic1 to 4 and Aux1 to 8.
3.Change the path to the program folder and open an existing program file.
4.Manually monitor the status of the DFD fault detector from the software.
5.Select each channel of the DSM signal listener from the software.
6.Change the settings for timing playback.
7.Controls the 16-input treble, bass, volume and 4 bus output volume and 7-band equalization of the DSC master.
8.Support for DigLink control of various audio sources