PX-3000 8x8 Audio matrix

Features:

• 8x8 multifunction audio matrix with more than 6 priority control and a variety of logic trigger input and output.

• Convenient touchscreen interactive interface.

• 7-inch color touch screen with a full operating system and real-time status monitoring.

• 8 stereo AUX audio inputs with input gain, treble and bass control.

• 8 zones balanced and unbalanced mono audio output with volume, treble and bass control.

• Max 8 pcs microphone workstations can be connected, with input gain, treble and bass balanced adjustment.

• Two Micro SD cards inputs( front panel SD1: BGM or Built-in timer; Rear panel SD2: internal fire pre-recorded information.)

• Max 32 pcs audio matrix controller can be linked and extend up to 256 zones can be supported.

• 0-8 pcs remote wall panel can be connected in o each zone.

• 6 steps priority control (high priority will override lower priority, same priority can be arranged)

• 1.Emergency paging microphone station (It can prioritize at the same level when RM1-8 are setting to be emergency microphone)

• 2.Automatic fire alarm (Pre-recorded fire message in SD2 or external fire audio input)

• 3.Business microphone station (It can prioritize at the same level when RM1-8 are setting to be business microphone)

• 4. Timer audio (Timing source from built-in SD1 or external timer audio source)  

• 5. Remote panel (LM-3088A, each branch area can connect 0-8 of panel)

• 6. BGM source (AUX1-8 and built-in SD1 source of master audio matrix)

• Built-in monitor speaker can select and monitor each input or output channel with volume control and mute switch by touchscreen.

• Internal SD1 source timer or an external timer source selection.

• Internal SD2 fire alarm pre-recorded or external fire alarm source selection.

• 8 fire trigger control inputs and the related zones can be customizable.

• 1 channel contact closure output when fire alarm or emergency paging occuring.

• AMP LINK connected port for four channel amplifier audio input.

• Support 3 wire and 4 wire (require external PSU）volume controller override.

• RJ45 control output can connect main and standby power amplifier switcher and cut the power supply and communicate to read the information.

• Ethernet control interface.

• Using universal 100-240VAC wide voltage switching power supply.

• Upgradeable firmware and SDK software development kit that can be integrated by third party control systems.

Specification

Model No.: PX-3000 8x8 Audio matrix host

Input: Aux 1-8: -10dB, Unblanced, Stereo.

Output: Output 1-8: 0dB, Blanced and unblanced, Mono.

Call station interface: 0dB, Balanced, RS-485, 24VDC

Micro SD1/Micro SD2: Max 32G, MP3 support amy sampling rate Layer3 audio decoding.

                                 Front panel SD1: BGM or Built-in timer; Rear panel SD2: Internal fire Pre-recorded message.

Touchscreen: Size:7-inch,Resolution: 800x600; Color: 64K, 16 bit RGB

                   Support the functions as: Text, GUI, Picture, Flash player and Touch control.

EQ control: Treble: ±12dB at 10kHz; Bass: ±12dB at 100Hz

Frequency response: 20Hz~20kHz, ±3dB

S/N: >90dB

THD: <0.01%

Priority control: EM>Fire>RM>Timer>LM>BGM

Serial communication: Communications protocol: RS-485; Communication distance: Max 1000 meters.

Power Source: Universal wide voltage switching power supply: 100~240VAC, 50/60Hz: Max output 156W

Power Consumption: Stand-alone: about 20W;  After connecting all microphone and panel: about 148W

Weight: 8kg

Dimensions: 482(W) x 132(H) x 290(D)mm

Downloads:    Manual (English)     Manual (Chinese)    CAD drawing